HOT ! 激安通販サイト 人気 Silverguard cover motorcycle VehicleCovers

• Silver

Product Description

Multi-bike cover 7 functions.
Asymmetrical: This is an asymmetrical type that is optimized for the position of the side stand and left handle lock.
Ventilation Function: The mirror part is equipped with an air ventilator. Reduces wind bulging and efficiently expands moisture stored inside.
(Colors that are easy to see on the front and back) The mirror part is blue and the front eyelet is set to red. Easy to distinguish between front and back covers.
(Large Lockable Eyelets) Equipped with eyelets for large locks. The front wheel is red and the rear wheel is yellow and the cover is easy to distinguish between the front and back.
【Sturdy Sewing】Durable sewing with double needle sewing machine.
[UV Protection Ox Fabric] Uses 150 denier thick silver ox. Blocks and reflects harmful UV rays on the car body.
Wind Protection Center Belt: The bottom of the body is equipped with a buckle type center belt that supports both left and right sides.

Indications

・Use may change without prior notice. In addition, we are not responsible for any accidents or failure due to insufficiencies in use. Please acknowledge
Bike covers are intended for vehicles in standard condition. If you are wearing accessories that change in dimensions, such as steering wheels, mufflers, front screens, and other accessories with a large variation, the vehicle listed in the car may not be sufficiently fitted.
・Cars with box are only compatible with the top case. Not compatible with side/pannier cases.
・L-box is made with a top case of about 9.8 gal (30 L) (width 14.2 inches (36 cm)), and the 4L-box is approximately 1.9 gal (50 L) (width 22.0 inches (56 cm)).
The vehicle chart is for reference only. If your vehicle is not listed, please refer to the sizing chart for your motorcycle cover.
The photo is a sample image. The amount of cover may vary by vehicle.
In addition, since it is made to match the left handle lock/side stand, the length of the left and right may differ when attached to the center stand.
When hot parts such as engines and mufflers are immediately after, they will melt when touching the cover or belt. Allow to cool before use.
Protects your motorcycle from direct sunlight, wind, rain and sand and so on, the motorcycle cover will definitely deteriorate over time. Depending on usage conditions and environment, the fabric becomes brittle or no waterproof performance will affect its life. Buy a new one.
・We use a waterproof cloth, but it is not completely waterproof. Waterproof performance weakens with age.
In addition, water may seep when rain exceeds the water pressure of the fabric.
・This product is a generic product, so depending on the car model, the length may be shorter or the eyelets do not come in the proper position. If you are worried about or want to wear loose, please refer to the basic size chart to purchase larger sizes.
Please refrain from using on repainted vehicles. Chemical reactions may occur due to weather conditions such as long rain, high temperatures, and high humidity, and may damage the paint surface.
If the cover is attached in wet conditions, it may cause rust and water spots. Please wipe the vehicle thoroughly before covering it.
Please dry the cover and vehicle in a well-ventilated place after rain. And this cover is not washable.
Please do not use a cover in strong winds. The cover may tear or your vehicle tipping over

Safety Warning

The posted images may differ from the actual product due to manufacturer specifications changes. Please acknowledge